♣ How to Make a Crocheted Clover or Shamrock ♣

Saint Patricks Day is around the corner and it is time for "the wearing of the green"!  Why a Shamrock???  Well, Irish folklore showed that St. Patrick used the shamrock as a symbol to teach pre-Christian Irish people about the Holy Trinity.  My lesson isn't going to quite compare, but I will be teaching you how to make a crocheted shamrock for you to share with your friends and family!

Materials Needed:
Scissors
4 ply green yarn
size H crochet hook
pin back or clip
adhesive

Pattern:
Leaving a 4 in tail, Chain 3.  Double crochet in the chain 1 space 3 times. Chain 2 and slip stitch in the same chain 1 hole that the double crochets were made in (all stitches will be made in this same hole for the remaining petals) Petal one is complete. Now, *chain 2 and double crochet 3 times followed by chain 2 and a slip stitch.  Repeat from * one more time. You should now have all 3 petals completed.  To make the stem, chain 5 from your last slip stitch.  Single crochet in the 2nd chain from the hook, single crochet in the next chain, slip stitch into the next, and slip stitch into the last one as well.  Bring your tail end through your last stitch and pull tight.  Cut your yarn and tie both tail ends together on the back.

If you want to make these bigger or smaller, just adjust the yarn and hook size accordingly.  Now that you have your shamrock completed, either glue it to a hair clip or pin back and wear it proudly.  These are so quick and easy to make.  Whip up a batch and hand them out, so no one is without green on St. Patty's Day!

As always, feel free to ask any questions or leave comments.

"Stick With Me" - Wool Felt Valentine Monster

 I wanted to share this pattern of a little felt monster I made last year for Valentines day.  I didn't get my blog started soon enough to share it last year, so I figured I would put it on here now!  He's really simple to make.  I cut mine out of red wool felt...a front and back of the body.  I sewed around it using a whipstitch, leaving a little opening for the fiberfill.  I also did a stab stitch through the arms, securing them between the body front and back. I know that it says to cut 4 pieces for the eyes...and you can, but another thing I did, was put a small piece of pipe cleaner bent like a V up and out of the eye-sockets. I then coiled the remaining pipe cleaner and glued on the felt eyes (you could also use googly eyes).  Once the monster is done, cut 2 pieces of felt  for the heart, whip stitching around it and filling it with fiberfill.  Bring the monster hands forward, either gluing or stitching them to the heart.
You can make this alien/monster happy or sad...or a combo of  both.  I called it "stick with me", but there's no saying it can't be "stuck with you" as well!☺
Like I said, it's quick to make,  fun and a good gift for a boy!
Here's the pattern.

Feel free to ask any questions or leave comments!
Enjoy! ♥

Travel Tissue Cover Tutorial

Today was the last day of Jam Junction (an after school program my daughter liked going to at our church).  She really liked going and is bummed that it's ending for the year.  So to thank the Pastor and all the volunteers for the fun she has had, I decided to make little "Bless You" travel tissue covers for her to give as gifts.  I am sure there are plenty of tutorials out there on how to make these, but I am going to share my version anyway. =)

I made them with 2 different fabrics- 6" x 7"outer fabric and 6"x 8" lining fabric.  These dimensions will give you a 1/4" border around the opening.  If you want more lining fabric to show, creating a thicker border, cut the lining fabric bigger and the outer fabric smaller.  For example- for a 1/2" border, cut a 6" x 6 1/2" outer and a 6" x 8 1/2" lining.  Another option is to put all of the lining fabric to one end, creating a wide border only on that end (making that the side you use when you overlap the ends). Confused yet???  Maybe some pictures will help!

I made 4 covers with a 1/4" border. (as you will see by the multiple covers in the photos)

First, cut out 1 outer and 1 lining fabric.  With the right sides facing together, sew along the 6" side on both ends with a 1/4" seam allowance (the lining fabric will be kind of bunched up in the middle).  Once you have sewn both ends, turn right side out and iron. (Here is where you can either put a 1/4" border on each side, or 1/2" border all to one side.  I chose to put 1/4" on each side).

The next step is optional, but sure makes the cover look a lot nicer.  It's time to embellish it!  I chose to use decorative stitches on my sewing machine.  I chose a flower pattern with the words "Bless You" (since these are for our church).  I know not everyone has a decorative stitch option, but instead you could sew on some ribbon, ric rac, appliqué, buttons, hand embroider it, or just sew some zigzags!  Anything you want!

Now that your cover is embellished, it is time to finish sewing it together.  Find the center and overlap the borders on that center line (not overlapping more than 1/4").  Make sure to put the side you want to show more of, on the top (for example- I put the "Bless You" side on the top).  Here is where you would also overlap the one sided border on top, if you chose to put all of the lining fabric to one side.
We are going to make a french seam, so we will be sewing it together how the finished cover is going to look.  Sew very close to the edges- about 1/8" seam allowance. Do this on both ends.  Trim and cut any stray threads, then turn the cover inside out (use a chopstick to push the corners out nice ).  We are going to be enclosing our seam to give the cover a nice smooth lining.  Sew another seam (a little over 1/8") enclosing the raw edge of our previous seam, like in th photos below. Do this on both ends.

Turn the cover right side out again and fill with a pack of travel tissue (Our Wal-Mart sells them in the travel sample isle, 3 packs for $1).   Be even more eco friendly and fill it with washable hankies! =)

These travel tissue covers make a great quick gift idea for almost anyone!  I hope you enjoy making them as much as I do!

As always all questions and comments are welcome! =)

I Scream, You Scream, We all Scream for Ice Cream!

As promised, I have come up with a new addition to the wool felt play food.  It's getting a little warmer outside and Cora keeps asking for ice cream, so I let her have it. (Sugar free of course!)

Do you want your own felt ice cream cone?  Well, here is what you will need to make one:

• Wool felt squares (tan for the cone and another color for the ice cream)
• Matching thread for the cone
• Red wool for the cherry, or seed beads/embroidery thread for the sprinkles
• Fiber fill/ poly stuffing
• Scissors
• disappearing ink pen or chalk
• ruler
• Needle and thread (yes hand sewing is involved!)
• Sewing machine (cone can also be sewn by hand if you have no machine)
• Wool Felt Ice Cream Cone Pattern - page1 page2

Let's get started!

First, print and cut out the pattern.  Cut 1 cone piece, 1 scoop circle, and 2 scoop drips (I forgot to show the 2 drips cut in the photo. Sorry!)

Once you have all of the pieces cut, we will get started on making the cone look a little more realistic.  Take your ruler and disappearing ink pen/chalk and mark lines going both directions on the cone.  I chose to start from the edge and mark every 1/2", giving me ten lines.  Do this from each edge for a total of 20 lines.  You can make your lines however far apart you would like them.  I found that 20 lines were not that big of deal to sew by machine, since they are so short.  Oh no, I gave away the next part...we will be sewing along these lines with the matching thread.  Line your sewing machine needle up with your marks and straight stitch on your lines.  I sewed all my lines going one direction first, then all of the lines going the opposite direction next. Try not to pull on the felt while sewing, so it does not distort.  You've made your cone look like a sugar cone, yeah!
Now it's time to make it look like a cone.  Put the right sides of the straight edges together and sew across from top to tip with 1/4" seam allowance.  Turn it right side out.  It should now look like a cone, as in the picture below.

What's a cone without ice cream?  First we are going to make the drip of the scoop.  Lay the 2 drip pieces on top of one another and sew along the edge of the curvy part (do not sew the ends closed).  Sew as close to the edge as you can (about a 1/8 " seam allowance).  Clip any curves that need it and turn inside out.  Now take both ends, opened up flat, and place them right sides together.  This will form a ring.  Sew them together with a 1/4" seam allowance.  Fold back in half and admire your new drip ring!  To attach the ring to the cone, slide it down onto the outside of the cone (matching up the seams), and sew along the inside edge (see photo below).

Now it's time for a scoop of ice cream, and some hand sewing!  I find it easier to do a gather stitch by hand rather than by machine for this next step.  On the big circle piece, do a running stitch along the outside edge.  Double up your thread so it will not break when you cinch everything together.  Leave a tail at the starting and end points so you have a way to pull and tie it all together.  Felt is thick, so just keep moving the fabric all together until it's closed like the second picture (leaving an opening for the stuffing).  Tie the threads in a knot, so it doesn't open back up while stuffing it.  Leave the thread and needle attached.  You will need it to attach to scoop.
Take your fiber fill and stuff the cone and the scoop as full as you can.
The next part is kind of tricky, but you can do it!  Place the scoop on top of the cone, holding it down with your 2 fingers (as in the 4th photo).   Use the same thread you used to cinch the scoop, to attach it to the cone.  Sew the scoop on with a ladder stitch.  Make a stitch right below the stitch line of the drip, then right above into the scoop (click the picture to enlarge it for better viewing).  Stitch like this all along the edge until the entire scoop is attached.

That's it!  You're done!  Now embellish it the way you want.  Make another little circle (like the scoop) to make a cherry, or sew seed beads (or embroidery thread) on for sprinkles.  Just make it age appropriate and safe.  We don't want any little ones choking on their ice cream.

I hope you've enjoyed this tutorial.

Do you want to see more felt play food tutorials?  Let me know what you are interested in seeing.

Please leave any comments or questions below, or contact me via email.

♥ Wool Felt Sweater Slipper Sock Tutorial and Pattern ♥

I have been making wool felt slipper socks for my daughter for the last 5 years.  She and my niece love them, so I wanted to share with everyone how I make them. 
(This tutorial is for personal use only.  I ask that you please do not sell any patterns or sweater slippers that are made from this tutorial.  Thank you! ☺)

Let's get started!

Here is what you will need.

• a felted (fulled) sweater
• scissors
• paper and pencil for making the pattern
• pattern weights and pins
• a sewing machine or a needle and thread if sewing by hand
• a flexible measuring tape and a willing participant to take measurements on
• scrap wool for an applique (optional)
• sewable heat-n-bond or similar for ease of attaching applique (also optional)

Here is a tutorial I wrote on making the pattern:
How to Draft the Wool Sweater Slipper Sock Pattern
(Google docs is glichy sometimes. If files are not available, just put a request of what doc you need in the comments or via email, and I will send you a copy☺)


Once you have your pattern made, lay it out on the sweater.  You want to make sure the sweater you have chosen is big enough for all of the pieces, also to figure out the best layout for the least amount of waste.☺  If the sweater is not big enough, it's not a big deal.  You can always mix and match pieces from other sweaters to complete the project.  For example, use different color soles than the rest of the slipper.  This is a fun thing to do even if the sweater you've chosen is the right size.  Mix and match...make your slippers unique!

Be sure to line up the top edge of the ankle cuff with the sweater ribbing so your slippers will have a nice edge.  It will also enable them to stretch well over your heel when putting them on.

Pin or put weights on the pattern pieces and cut them out.  I usually cut through the 2 layers at once so I end up with mirror images of my pattern.  Just be careful that a seam placement or knit pattern on the opposite side does not differ from the side you are cutting on.  I also make sure that the upper piece and sole are not on the ribbing part of the sweater.  Ribbing is usually wavy and it does not felt like the rest of the sweater.

Another option, depending on the thickness of wool, is to make a double soled slipper for extra cushion.  This is a little more difficult to sew.  If you are not really experienced, you may want to skip it on your first pair.  The sweater I choose was kind of thin, so I choose to double up the sole.
You can also hand sew a leather sole on for added protection.  My daughter just starts to wear out the sole of hers before she needs a new size, so I have never done this.  It would be a good idea for feet that have stopped growing though.  I think it would really extend the life of the slippers.

The following picture shows how I placed my pattern pieces and cut them out. (Do you like my excessive pattern weights?  Hey... Those patterns were going nowhere!)

Now that the pieces are all cut out, it is time to embellish them if you want to. (Unless you want to needle felt a design on them. That can be done later if you place a foam block inside them after they are made.)